Heltec LoRa 32 LoRaWAN Node on The Things Network
Creating a node on The Things Network with a Heltec LoRa 32 using the Arduino IDE The Heltec Lora 32 is an ESP32 module with an SX1276 chip and a little 0.96″ OLED screen.…
Creating a node on The Things Network with a Heltec LoRa 32 using the Arduino IDE The Heltec Lora 32 is an ESP32 module with an SX1276 chip and a little 0.96″ OLED screen.…
Setting up the Heltec HT-M01 and using it as a gateway for The Things Network (TTN) The HT-M01 concentrator board is based on the SX1301 baseband chip and is available…
Some initial information to get up and running with the Heltec Wifi Lora 32 Kit Module. These are available from the Heltec store on AliExpress. Like a lot of these devices this…
A set up guide for sending LoRa data using the Arduino UNO with the RA-02 module by Ai-Thinker. I’ve seen a few people asking how to set this up in various places.…